Advances in Materials Science and Engineering

Mechanical Performance of Concrete Made with Recycled Aggregates from Concrete Pavements
Source: Advances in Materials Science and Engineering Published on 2020-09-15
Influence of Plantain Pseudostem Fibres and Lime on the Properties of Cement Mortar
Source: Advances in Materials Science and Engineering Published on 2020-09-09
Prediction of Adhesively Bonded Polyurethane-to-Steel Double Butt Joint Failure Using Uncertainty Analysis
Source: Advances in Materials Science and Engineering Published on 2020-09-08
Prediction of Later-Age Concrete Compressive Strength Using Feedforward Neural Network
Source: Advances in Materials Science and Engineering Published on 2020-09-08
Experimental and Numerical Study on the Influence of Corrosion Rate and Shear Span Ratio on Reinforced Concrete Beam
Source: Advances in Materials Science and Engineering Published on 2020-09-08
An Efficient Damage Identification Method for Simply Supported Beams Based on Strain Energy Information Entropy
Source: Advances in Materials Science and Engineering Published on 2020-09-07
Effects of Simulation-Guided Microwave Presintering Process on the Preparation and Final Properties of Pure Ceramic Rings: Lower Sintering Temperature and Higher Mechanical Properties
Source: Advances in Materials Science and Engineering Published on 2020-09-07
Mechanical Performance and Durability Evaluation of Sandstone Concrete
Source: Advances in Materials Science and Engineering Published on 2020-09-01
Direction of Groove Detection for Wear Image of Four-Ball Friction Test Based on Gray Difference of Inclination Angle
Source: Advances in Materials Science and Engineering Published on 2020-09-01
Study on Void Structure Reconstruction of Asphalt Mixture by X-Ray Computed Tomography and Otsu’s Method
Source: Advances in Materials Science and Engineering Published on 2020-08-31
Physical Simulation on Molten Steel Flow Characteristics of RH Vacuum Chamber with Arched Snorkels
Source: Advances in Materials Science and Engineering Published on 2020-08-30
Studying and Optimizing the Effect of Process Parameters on Machining Vibration in Turning Process of AISI 1040 Steel
Source: Advances in Materials Science and Engineering Published on 2020-08-30
The Effect of Static Blasting Materials on Coal Structure Changes and Methane Adsorption Characteristics
Source: Advances in Materials Science and Engineering Published on 2020-08-29
Evaluating the Physical and Rheological Properties of Rejuvenated Styrene-Butadiene-Styrene-Modified Asphalt Binders
Source: Advances in Materials Science and Engineering Published on 2020-08-28
Optimized Polynomial Virtual Fields Method for Constitutive Parameters Identification of Orthotropic Bimaterials
Source: Advances in Materials Science and Engineering Published on 2020-08-28

期刊官网：https://www.hindawi.com/journals/amse/

开源期刊版面费：2200美元

暂无评论

要发表评论，您必须先登录

微信扫一扫,分享到朋友圈

Advances in Materials Science and Engineering

首页
公众号