Road Materials and Pavement Design

Sensitivity Index comparison of pavement mechanistic-empirical design input variables to reflective cracking model for different climatic zones
Source: Road Materials and Pavement Design Published on 2020-04-07
Evaluation of the response from the rigid pavement analysis system (RPAS) program for the characterisation of jointed concrete pavements
Source: Road Materials and Pavement Design Published on 2020-04-06
Rheological properties and chemical characterisation of reacted and activated rubber modified asphalt binder
Source: Road Materials and Pavement Design Published on 2020-04-01
Mechanical properties of glass fibre reinforced soil and its application as subgrade reinforcement
Source: Road Materials and Pavement Design Published on 2020-03-27
Linking chemical to rheological properties of asphalt binder with oxidative aging effect
Source: Road Materials and Pavement Design Published on 2020-03-24
Characteristics of cement-stabilized macadam containing surface-treated recycled aggregates
Source: Road Materials and Pavement Design Published on 2020-03-24
Application of recycled concrete aggregates and crushed bricks on permeable concrete road base
Source: Road Materials and Pavement Design Published on 2020-03-23
A framework for the analysis of damage and recovery characteristics of asphalt mixtures
Source: Road Materials and Pavement Design Published on 2020-03-19
Characterisation of asphalt binder modified with ethylene–propylene–diene–monomer (EPDM) rubber waste from automobile industry
Source: Road Materials and Pavement Design Published on 2020-03-19
Analysis of a moving measurement platform based on line profile sensors for project-level pavement evaluation
Source: Road Materials and Pavement Design Published on 2020-03-18
Validation of inverse stereology generation of two dimensional area gradations for computational modelling of asphalt mixtures
Source: Road Materials and Pavement Design Published on 2020-03-17
Research on the impact of mineral type and bitumen ageing process on asphalt-mineral adhesion performance based on molecular dynamics simulation method
Source: Road Materials and Pavement Design Published on 2020-03-16
Tridimensional linear viscoelastic properties of bituminous mixtures produced with crumb rubber added by dry process
Source: Road Materials and Pavement Design Published on 2020-03-16
Chemical, thermophysical, rheological, and microscopic characterisation of rubber modified asphalt binder exposed to UV radiation
Source: Road Materials and Pavement Design Published on 2020-03-11
Influence of sampling interval and evaluation area on the three-dimensional pavement parameters
Source: Road Materials and Pavement Design Published on 2020-03-11

微信扫一扫,分享到朋友圈

Road Materials and Pavement Design

首页
公众号